High Stability Thyroid Hormone T3 T4 Antigen Rapid Test Cassette

【Product name】

Total Triiodothyronine(TT3)Rapid Quantitative Test(Fluorescence immunoassay)

【Package specification】

25 Tests/kit

【Performance】

1. Limits of detection,No more than 0.50 nmoL/L.

2. Accuracy,The relative deviation from the target value is within ±15%.

3. Precision,The within and between assay coefficient of variations are within 15%.

4. Linear range,Within the linear range (0.50 ~ 10.00nmoL/L), the linear correlation coefficient R≥0.990.

【Components】

The components in different batches of kits cannot be used interchangeably.

【Test procedure】

1. Before the test, please read the instructions completely. If the test card and sample are stored in cold storage, they should be balanced at room temperature (15-30)℃ for not less than 30min before use.
2. Start NIR-1000 dry fluoroimmunoassay analyser and correctly select the corresponding sample type on the instrument.
3. Take out the ID card, make sure that the batch number of the ID card is consistent with that of the test card, and insert the ID card into the ID card port of the instrument.
4. Take out the test card from the aluminum foil bag and use it within 15 minutes.
5. Place the test card on a clean horizontal table and mark it horizontally.
6. Mix 100 µL of patient sample with 200µL of sample diluent. Apply 100 µL of diluted samples to the well of the test card.
7. At 15 minutes after addition of samples, insert the test card into NIR-1000 dry fluoroimmunoassay analyser and click the “Instant test” button to read the results.

【Note】

1. This kit is only used for in vitro diagnosis.

2. The test card and sample diluent are disposable and cannot be reused.

3. Please check the integrity and validity of the kit package before use, and then open the package. When it is stored at low temperature, it should be restored to room temperature (15℃ ~ 30℃) before opening the package for use. The reagents with damaged inner package and beyond the validity period cannot be used.

4. The requirements of specimen collection and storage should be strictly observed. If the specimen is turbid, it should be centrifuged and discarded before use.

5. The used kits should be treated as potential infectious substances, and all samples, reagents and potential pollutants should be disinfected and treated according to the relevant local regulations.

WWHS POCT Assay List

Packing and Delivery

Packing: Standard packing, neutral packing, OEM packaging are welcome;
Delivery: According to the specific quantity of the product;
Payment: Credit Card, Paypal, Local Bank, Western Union, T/T, etc.
Shipping: International Express, by Air, by Sea, etc;