Place of Origin:
CN
Brand Name:
WWHS
Certification:
CE
Model Number:
CRP
Contact Us
【Product name】
Diagnostic Kit for C-reactive Protein (Immunochromatographic assay)
【Package specification】
25 Tests/kit
【Performance】
1. Detection limit: No higer than 0.5mg/L.
2. Accuracy: the relative deviation from the target value is not more than±10%.
3. Repeatability: coefficient of variation (CV) should be no more than 10%.
4. Inter batch difference: the relative range (R) between batches should be no more than 15%.
5. Linear range: within the specified linear range of 0.5mg/l-200mg/l, the linear correlation coefficient R ≥ 0.990.The absolute deviation of the linear range in [0.5-5] mg/L is not more than ±5 mg/L, the linear range is (5-200] mg/L, the relative deviation is less than±10%.
【Main components】
| name | Loading capacity | component |
| Test card | 25 | It is composed of fluorescent pad (coated with fluorescent labeled CRP monoclonal antibody), nitrocellulose membrane (coated with CRP monoclonal antibody and Goat anti mouse IgG antibody), absorbent paper and backing |
| Sample diluent | 25 | Phosphate buffer |
| ID card | 1 | Record the standard curve information of this batch of reagents |
The components in different batches of kits cannot be used interchangeably.
【Storage conditions and validity period】
4℃ - 30℃, dry, dark, no freezing, sealed in aluminum foil bag, valid for 18 months. The test card should be returned to room temperature (15-30)℃ before use, and should be used within 15 minutes after unsealing under the environment of temperature (15-30) ℃ and relative humidity (20% - 90%).
【Test procedure】
1. Before the test, please read the instructions completely. If the test card and sample are stored in cold storage, they should be balanced at room temperature (15-30)℃ for not less than 30min before use.
2. Start NIR-1000 dry fluoroimmunoassay analyser according to the instruction manual of the instrument, and carry out quality control verification according to the instruction manual of the instrument(Note: the reagent has been calibrated in advance, and the calibration curve parameters of each batch of reagent have been stored in the ID card. The test can be carried out only after the quality control is passed. Otherwise, the cause should be found out before testing.)
3. Remove the test card from the aluminum foil bag and use it within 15 minutes.
4. Place the test card on a clean horizontal table and mark it horizontally.
5. Add 5μL sample to sample diluent (1500μL), mix well and add 100μL diluted sample to the sampling hole.
6. Insert the test card into dry fluoroimmunoassay analyser, press the “timing test” key, automatically time for 3 minutes, automatically judge the test results, and display the quantitative results on the screen. Or insert the test card into the analyzer after 3 minutes, and press the “Instant test” key, and the instrument will automatically interpret the results.
【Note】
1. The kit is only used for in vitro diagnosis.
2. The test card is disposable and cannot be reused.
3. Please check the integrity and validity of the kit package before use, and then open the package. When it is stored at low temperature, it should be restored to room temperature (15-30) ℃ before opening the package for use. The reagents with damaged inner package and beyond the validity period cannot be used.
4. The test card should be taken out from the aluminum foil bag and tested within 15 minutes to avoid being placed in the air for a long time and causing damp.
5. The requirements of specimen collection and storage should be strictly observed. If the specimen is turbid, it should be centrifuged and discarded before use.
6. The kit contains products from animals. The qualified information of animal source and health status cannot guarantee the existence of infectious pathogens. Therefore, it is suggested that these products should be treated as potential infectious substances, and all samples, reagents and potential pollutants should be disinfected and treated according to the relevant local regulations.
7. Hematocrit too high or too low may affect the results of whole blood test, it is recommended to use other detection methods for verification.
Our Service
Pre-sale services:
1.Supply our complete catalogue for your reference.
2.Help you to learn more details of our equipment.
3.Design and produce the equipment as per your requirement
4.provide diagnostic solution for you
Sales Service:
1. Professional service of the whole exporting processing .
2. Give supporting on your sales chennel establishment of our products.
3. OEM accepted.
After Services:
1.Guarantee for 1 year
2.Quik answer and solution for any problem during your operation
Advantage:
1. Advanced Quality: We have strict quality control system and enjoy good reputation in the market.
2. Sincerly Service: We treat clients as friend and aims at building long term business relatiionship.
FAQ:
1. What is the MOQ?
Generally if you choose the different products, our minimum order qty. also will be different. One sample available.
2. What about the delivery time?
The goods need 7-21 work days to be made upon deposit.
3. Does your product have any warranty?
Yes, we offer 6 months limited warranty for our products.
Damage due to misuse, ill treatment and unauthorized modifications and repairs are not covered by our warranty.
4. What's your payment method?
We usually accept the payment methods include PayPal, TT, and Western Union.
50% deposit in advance and balance before shipping. Buyer can choose which payment ways that you accept.
PayPal is most useful and safe, please don’t refuse PayPal fee when you choose PayPal.
5. What's your shipping method?
We provide comprehensive shipping methods.
For small quantity orders we ship by DHL Air-Express, or EMS/TNT/UPS/FEDEX Express service, it is safe and fast.
For large quantity orders we ship by Air transportation or sea transportation, we can also ship order to buyer’s cargo agent in China.
Send your inquiry directly to us
