NT-proBNP Rapid Quantitative Test Kit POCT WWHS IFA IVD Blood Diagnostic

【Product name】

  N-terminal prohormone of brain natriuretic peptide (NT-proBNP) Rapid Quantitative Test(Fluorescence immunoassay)

【Package specification】

  25 Tests/kit

【Performance】

1. Analysis sensitivity,No more than 18pg/mL.

2. Accuracy,The relative deviation from the target value is within ±10%.

3. Precision,The within and between assay coefficient of variations are within 15%.

4. Linear range,Within the linear range (20-35000pg/mL), the linear correlation coefficient R≥0.990.

【Main components】

The components in different batches of kits cannot be used interchangeably.

【Storage conditions and validity】

The test card should be stored at 4℃~30℃, dry, dark and no freezing. It should be stored in sealed aluminum foil bag and valid for 18 months. The test card should be returned to room temperature (15℃~30℃) before opening. It should be used within 15 minutes after unsealing under the environment of 15℃~30℃ and 20% ~ 90% relative humidity.

The production date, batch number and expiration date are shown in the outer package of the product.

【Test procedure】

1. Before the test, please read the instructions completely. If the test card and sample are stored in cold storage, they should be balanced at room temperature (15-30)℃ for not less than 30min before use.
2. Start NIR-1000 dry fluoroimmunoassay analyser according to the instruction manual of the instrument, and carry out quality control verification according to the instruction manual of the instrument(Note: the reagent has been calibrated in advance, and the calibration curve parameters of each batch of reagent have been stored in the information card. The information card is inserted before use, so it is not necessary to calibrate again, and the test can be carried out only after the quality control is passed; Otherwise, the cause should be found out before testing.)
3. Remove the test card from the aluminum foil bag and use it within 15 minutes.
4. Place the test card on a clean horizontal table and mark it horizontally.
5. Mix 100µL of patient sample with 300µL of sample diluent. Apply 100µL of diluted samples to the well of the test card.
6. Insert the test card into NIR-1000 dry fluoroimmunoassay analyser, press the [timing detection] key, automatically time for 10 minutes, automatically judge the test results, and display the quantitative results on the screen. Or insert the test card into the analyzer after timing for 10 minutes, and press the [real time detection] key, and the instrument will automatically interpret the test results.

【Note】

1. This kit is only used for in vitro diagnosis.

2. The test card and sample diluent are disposable and cannot be reused.

3. Please check the integrity and validity of the kit package before use, and then open the package. When it is stored at low temperature, it should be restored to room temperature (15℃~30℃) before opening the package for use. The reagents with damaged inner package and beyond the validity period cannot be used.

4. The requirements of specimen collection and storage should be strictly observed. If the specimen is turbid, it should be centrifuged and discarded before use.

5. The used kits should be treated as potential infectious substances, and all samples, reagents and potential pollutants should be disinfected and treated according to the relevant local regulations.

About WWHS Biotech Inc

WWHS Biotech. Inc Is A High-Tech Enterprise Incubated By The Research Institute Of Tsinghua University In Shenzhen In 2016. The Company Is Located In The National Biomedical Industrial Base In Pingshan District, Shenzhen, With About 32,000 Square Feet Space For Workshop And Office.

Our company's main business is INFRARED fluorescent POCT. The main application scenarios of POCT include emergency department, ICU, chest pain center and stroke center, operating room, and various departments of grade hospitals. Community health, outpatient and other primary medical institutions at all levels; Pharmacies, home use and other organizations and individuals targeted at end customers. POCT is characterized by its simplicity and speed, freedom from application scenarios, and high cost performance. However, the current pain point of POCT industry lies in how to solve the problems of low sensitivity and poor precision faced by POCT products.

FAQ:

1. What is the MOQ?

Generally if you choose the different products, our minimum order qty. also will be different. One sample available.

2. What about the delivery time?

The goods need 7-21 work days to be made upon deposit.

3. Does your product have any warranty?

Yes, we offer 6 months limited warranty for our products.

Damage due to misuse, ill treatment and unauthorized modifications and repairs are not covered by our warranty.

4. What's your payment method?

We usually accept the payment methods include PayPal, TT, and Western Union.

50% deposit in advance and balance before shipping. Buyer can choose which payment ways that you accept.

PayPal is most useful and safe, please don’t refuse PayPal fee when you choose PayPal.

5. What's your shipping method?

We provide comprehensive shipping methods.

For small quantity orders we ship by DHL Air-Express, or EMS/TNT/UPS/FEDEX Express service, it is safe and fast.

For large quantity orders we ship by Air transportation or sea transportation, we can also ship order to buyer’s cargo agent in China.