Lp-PLA2 Rapid Test Kit Cardiac Diagnostic For Physical Examination Center

【Product name】LP.pdf

Diagnostic Kit for Lipoprotein-Associated Phospholipase A2(Immunochromatographic assay)

[Intended Use]

The product is applicable to in vitro quantitative test of concentration of lipoprotein phospholipase A2 (Lp-PLA2) in whole blood, plasma and serum of human body.

[Applicable Instrument]

NIR-1000 dry fluoroimmunoassay analyser produced by WWHS Biotech. Inc

[Test Method]

1. Please thoroughly read the specification before test. Frozen test card and sample should be placed at room temperature (15-30)℃ for at least 30min before use.
2. Start NIR-1000 dry fluoroimmunoassay analyser and verify quality control according to the specification. (Note: Reagent has been calibrated in advance and calibration curve parameters of each batch of reagents have been stored in the information card. Insert the information card before use and carry out test without re-calibration after passing quality inspection; otherwise, identify the cause before test.)
3. Take out the test card from the aluminum foil bag and use it within 15min
4. Place the test card on a clean horizontal table top and label it.
5. Take 10μL of sample and add it into 600μL sample diluent. Then, mix the solution evenly, take 100μL of the solution and add it into the test card well.
6. Insert the test card into NIR-1000 dry fluoroimmunoassay analyser and press “Timing test” to keep time for 10min automatically. The analyzer will judge and read the test result automatically and display it in the screen. Or insert the test card into the analyzer after 10min and press “Instant test”, the instrument will judge and read the test result automatically.